Envíos recientes

Análisis de disponibilidad y confiabilidad de los endoscopios en el área de gastroenterología para la empresa LM Instruments S.A.

Angulo Martínez, Jorge Luis | 2016

Análisis de falla del sistema toma de fuerza (PTO) tractor kubota M9540

Martin Ávila, Juan David | 2016

PTO (power take off) refers to the coupling system of the tractor to any instrument designed for connection such as threshers, weed cutters, forage, harvesters, mowers, balers and etc. This type of connection has presented problems on tractors M9540 of Kubota because customers of this reference have claimed by calling the call center at the headquarters of Chia-Cundinamarca in Colombia that the PTO has flaws such as it does not stop the implements that are coupled to the rear of the tractor that is connected to the PTO. Unusual noise at the time of engaging the clutches PTO at the time of the oil change when rotating. PTO shaft made a terrible noise and possible damages to operators, animal and harvest that are near the tractor due to the malfunction of the brake of the PTO. That is why an investigation on possible damage affected by the PTO system, to improve the productivity of Kubota’s tractors owners´ of the M9540 Kubota model and for the Representatives of the Brand in Colombia. Moto Mart SA, for this reason, we chose to perform an analysis based on the data acquired by the call center at Moto Mart SA Chia Cundinamarca headquarters to find possible solutions to resolve the problem.

Análisis de la accidentalidad que se presentó en el proceso de mantenimiento en masivo capital, patio San Bernardino, empresa del SITP, para el primer cuatrimestre del año 2016

Gutiérrez Barrera, Laura Sofía | 2016

Análisis de la gestión de mantenimiento en una empresa del sector metalmecánico

Castillo Acosta, Camilo Andrés | 2016

In this research project an analysis to maintenance management is developed in a company in the metalworking sector. In the same one based on excellence matrix to observe maintenance assessment is established. And analyze what kind of maintenance is currently the company and according to data obtained are focused perceive whether or not the vision of the organization. As a strategy for improvement according to the detected findings suggest new TPM -based tools and RCM2 to help improve their management indicators not only maintenance area but other areas that make up the company. Based on the above, this research will contribute a strengthening in improving the measurement and control tools to focus on those weaknesses detected in actions to improve both the maintenance department and other areas involved.

Análisis de los desperdicios por mantenimiento en la empresa Industrias Ectricol S.A.S.

Prado Rodríguez, David Gerardo | 2016

Ectricol Industries is a company specialized in developing solutions for protection and control in power systems. These solutions are oriented to the construction industry, mining, energy and oil sector. Among the main products manufactured are the centers of electric power, pressurized electrical panels for explosive environments, boards for general distribution, transfer boards, control centers of motors, boards sync, cabinets meters, capacitor banks, including others. For the manufacture of different types of products are available a large production plant composed mainly for metalworking area and other assembly and assembly of equipment. In the area of metalworking are very important equipment such as CNC punching, CNC bending, MIG welding equipment and automated paint line. During this project it was evident that in Industrias Ectricol are incurred large maintenance costs due to waste presented. Therefore an analysis of the waste for maintenance in order to establish the economic impact of the most important was made, and propose action plans to mitigate or eliminate activities that are generating waste analyzed. To achieve these goals, gathering information and then analyze was performed using methodologies such as criticality analysis and segmentation waste, facilitating raise proposed solutions and the development of financial analysis. In conclusion, it was evident according to the data found in the analysis of waste in the company Ectricol SAS, which waste most generates costs and delays in the production processes of the company are dead or stops times and waits in transit repairs and spare parts.

Análisis del ciclo de vida de la planta térmica didáctica de la universidad ECCI en las etapas de operación y mantenimiento

Guevara Umaña, Andrés Ricardo | 2015

The need to maintain continuous and efficient production at all times, has developed a new perspective of the conservation and use of equipment in industrial enterprises; and this is how were implemented increasingly Maintenance concepts. Colombian University School of Industrial racing is a family business dedicated to providing educational services. As part of teaching methodologies - learning a didactic thermal plant that supports the theoretical activities of students and their level of use as a Maintenance Plan to ensure the maintenance and operation of equipment extending its life proposed handled. To reach the Maintenance Plan is proposed, were dispensed various stages in the process: data collection, data analysis, proposed solution containing: weekly maintenance, monthly maintenance and detailed semi-annual maintenance for each activity and related costs as well as personnel involved. Finally give some additional recommendations to achieve total thermal efficiency of teaching plant.

Aplicación de los métodos de evaluación de LEST y OWAS para valorar los riesgos existentes en el taller sede (l) de ajuste de motores y sistemas de transmisión de potencia de la Universidad ECCI.

Quiroz Revelo, Maryluz Andrea | 2916

Aplicación del modelo del costo de desperdicio a las actividades de mantenimiento en el taller de estructuras del centro de mantenimiento y reparación de helicópteros rusos CMR S.A.S.

Martínez Rodríguez, Diana Carolina | 2015

Caracterización de factores de riesgo biomecánico en miembros superiores, que pueden generar enfermedades laborales en los trabajadores encargados del cambio de crucetas de línea des energizada del Consorcio Mecam

Erazo García, Lina Johanna | 2016

The present work aims to increase knowledge about occupational diseases that develop biomechanical risk by employees who perform the task of changing lines spreaders MECAM des energized the consortium, and disseminate this knowledge to access this document contributing to the establishment of strategies to reduce its incidence; Goal: the diagnosis was to conduct a characterization of musculoskeletal occupational risk factors in upper limbs, workers line the MECAM Consortium des energized by the activity of change of spreaders; in type of study it was determined as descriptive, which proposes the implementation of tools that seek to specify the properties, characteristics and important profiles of individuals, groups, communities or any other phenomenon to undergo an analysis, providing this time, information about common state of health of a population group known and to facilitate the study of musculoskeletal injuries that are being generated in the upper limbs of workers responsible for the change of energized line spreaders of MECAM des Consortium. results: the characterization of biomechanical risk factors in upper limbs that can generate occupational diseases in the workers required change line spreaders des energized, a survey to identify risk from physical load was applied to a total of 45 workers 48, this being a representative and with a reliability of 95.5% sample, based on the findings of the characterization concludes that partner staff does not perform adequate prevention to reduce such diseases, the employees do not count with mechanical aids facilitate the work, thus favoring the occurrence of occupational illnesses by biomechanical risk.

Desarrollo de consultoría para medir la gestión de mantenimiento en Innovapor S.A.S.

Guzmán Laverde, Jorge Vicente | 2016

This paper explores the consultancy carried out through an audit in the management and maintenance of the company INNOVAPOR S.A.S, by means of the model applied in Eglobalt Technology S.A.S. using the University of Talca which lies in the quantitative assessment of the current status of maintenance This audit is intended to carry out an assessment and to publicize solutions by means of plans of action to the novelties found, also close gaps in procedures, times, spare parts, labor, etc., giving the company more opportunity for growth and profitability in the short term. The proposal to measure the within this audit were resolved different matrixes that are focused on the identification of the company, the criticality of routes of inspection, information management on computers, status of current maintenance history of maintenance costs and effectiveness of current maintenance. With these parameters evaluated were can generate graphs diagnostics that we indicate in what state is the maintenance of the company. Maintenance management through the consultancy seeks to optimize the practices of the service and the attention to the equipment installed in the company. Subsequently to be with these results can be reached to give action plans in each of the items evaluated showing their costs and impacts for staff both administrative and operational.

Desarrollo de un proceso de consultoría en gestión de mantenimiento caso de estudio "Gate Gourmet Colombia LTDA."

Galindo Berrío, Juan Sebastián | 2016

This work is based on the implementation of the studies, pieces of work, templates and other investigations by the Director of the Mechanical Engineering School of Talca University in Chile, Fernando Felix Espinosa Fuentes, for GATE GOURMET COLOMBIA LTDA, a supply and catering service company for commercial airlines. Our objective is to carry out a maintenance consultancy through an audit. For this purpose, we define the conceptual framework and the state of the art, and explain the methodology used in data compilation. We also outline the method for analyzing this data in order to create improvement plans. In addition, we describe the type of investigation and data sources and present a financial analysis related to the implementation of the improvement plans.

Desarrollo de un proceso de consultoría para medir la gestión de mantenimiento, caso equipos para estaciones de suministro de combustible y lubricantes

Serna, Yeison Camilo | 2016

Desarrollo de una propuesta basada en la metodología PMO para las unidades de bombeo mecánico de extracción de crudo

Ruiz Llorente, Niyiseth | 2020

Two thirds of the wells worldwide are operated by means of Mechanical Pumping, which makes it relevant to maintain the BMU associated with the procurement and production of crude oil, this project is being developed in Field A. Approximately 692 Units were analyzed, which present a number of constant failures and breakdowns that prompted the project of a maintenance proposal based on a PMO; For the development, initially an internal consultancy was prepared and executed, so that the current situation of the maintenance department and its deviations could be known, in order to establish a maintenance methodology, and finally and taking into account the chosen strategy, define activities that guarantee the availability of equipment and the continuous progress of maintenance management.

Diagnóstico de las condiciones de salud de origen biomecánico del área administrativa de la empresa Vehículos del Café S.A. el primer semestre de 2016

Farfán Casallas, Jenifer Dahana | 2016

Diseño de protocolo para disposición final de los equipos biomédicos en la red Colsubsidio

Barbosa Bobadilla, Leonardo | 2015

Diseño de un plan de mantenimiento para la red óptica de una HFC.

Salas Martínez, Camilo Alberto | 2015

Telecommunications networks are complex structures that incorporate information transmission for proper operation electronics in constant change and evolution, different means of transmission and different communication protocols; additionally much of its infrastructure is physically located in places where there is no control and safeguard the company providing telecommunications service generally is exposed to weathering in rural areas and cities where operating conditions may become be extreme, this implies a great effort and maintenance strategy to ensure proper operation and quality of services provided over the network. Given the large number of components, and different areas of knowledge that involves the operation of a telecommunications network maintenance work must be segmented and clearly delimited. With this project seeks to design a maintenance plan for the optical network of HFC residential service network, with which the availability and quality of services transported at a reasonable cost guarantee, this cost should not exceed 5%, of the revenues generated by the HFC network. To achieve this goal, we will design a typical optical network in a city and analyze its different components, mode of operation, quality parameters, points of failure, vulnerabilities and find a method (or combination of methods) keeping the which are adapted to the needs of the network, determining the necessary technical resources, and maintenance activities to be performed to ensure higher availability than 95%.

Diseño del plan de mantenimiento preventivo basado en la metodología de las 5 M para un sistema de transporte masivo de pasajeros

Calderón Gaitán, Albert Orlando | 2015

In this paper, analysis and research on various topics directly related to the maintenance display, which focus toward a firm mass transit that currently presents problems in maintaining and therefore there are huge losses as productivity and credibility among customers, will begin with a definition and shaping of the problems presented here in order to identify the most representative flaws. Then it continues with the development of the theoretical framework and issues related to the problems presented, in order to make an appropriate design for the implementation of the 5M is necessary to establish performance indicators and some improvements in the maintenance area this work must go accompanied procurement of spare parts, training, procedures, which is represented in investment costs, to keep track of these tasks to create a maintenance plan is proposed, considering the machines, the methodology, environment, labor and raw material. Finally some recommendations and conclusions of the strategy will be applied.

Diseño y propuesta de un programa de mantenimiento preventivo para la gestión del activo máquina embolsadora Razim

Hernández Barón, Mauricio | 2015

This project is focused directly on the machine managing bagger Razin, developing a preventive maintenance program to improve the performance of this machine and extend its life. A number of maintenance activities with which it is intended to implement the maintenance program in its entirety is proposed, schedules of these activities were raised, maintenance processes were analyzed and selected the most suitable to achieve its implementation, a detailed study was conducted this machine to understand its functioning and components, thus achieving identify and implement maintenance tasks necessary to ensure that the machine to operate correctly and safely. According to the information collected and an analysis of the reality of the maintenance performed on the machine embolzadora Razim; Recommendations are made for appropriate management of equipment maintenance and infrastructure are there in the company, The result of proper and adequate implementation of a preventive maintenance system, based on terms of quality, safety, environmental conservation is reflected in the lower cost of maintenance.

Elaboración de manual de operaciones sobre el uso de sistemas de bloqueo en línea de envasado de aceites: caso empresa hidrocarburos

Ramírez Arévalo, Edwin Alexander | 2016

Taking into account that security is one of the primary factors in the companies currently, it decided focus the efforts on improving and train staff of the oil company, to have a clear focus on the importance of a good lock to equipment that can generate some risk when them are activated unexpectedly, in that way the staff will be trained to know the different devices and their respective use, with the goal to performs a lock that will be effective and not to allow that the computer will be manipulated without the consent of the technician who assure it. It has as starting point that the company not have locking systems and technicians perform the operation without realize any blocking and / or signaling, with this reference we start to working for deliver the information as complete as possible, without neglecting the regulations that governing this type of activities. The budget is delivered to the company is based on the latest equipment, which are suitable for realizes the different activities.

Elaborar planes de mantenimiento para industria plástica a fin de mejorar su productividad: caso ABC Gotuplas

Mesías, Javier Hernán | 2016

Currently it requires the company to achieve your goals and match or improve the national quality standards in production and quality, for that must implement a maintenance program which is in continuous improvement, with the need to have a consistent and efficient production 24 hours a day have developed new concepts at national level on the conservation and use of equipment in industrialized enterprises to implement increasingly Industrial Maintenance. Maintenance over time has reinvented itself giving way to various kinds of it, which improve and are crucial in producing industries; these classes are used depending maintenance I need in my company or want to get results. The absence of an effective preventive maintenance can have an immediate adverse economic effect; the same is true of temporary repairs, lack of personnel, stock parts, technical means or replacement by other elements of inferior quality. In the report you want to perform an analysis of how the plastic industries can improve their approach to maintenance, improve it and make managements understand that investing in maintaining improvement circumstantially productions of their companies; The company works under corrective maintenance processes where there is no analysis, planning, programming and implementation, strive to work in the corrective and do not accept changes in their way of working. This proposal shows the importance of implementing a maintenance system in modern industry as well as understands and manage some theoretical bases that are very essential for proper alignment of a plan of maintenance that improves the productivity of the company and that is in continuous improvement.