dc.contributor.advisor | Moreno Guarín, Diana Catalina | |
dc.contributor.author | Ortiz Mateus, Luis Fernando | |
dc.contributor.author | Triana, Camilo Andres | |
dc.contributor.author | Aldana Sánchez, Juan Camilo | |
dc.date.accessioned | 2021-08-26T21:24:15Z | |
dc.date.available | 2021-08-26T21:24:15Z | |
dc.date.issued | 2021 | |
dc.identifier.uri | https://repositorio.ecci.edu.co/handle/001/1379 | |
dc.description.abstract | Considerando la gran problemática ecológica que produce el consumo
masivo de plástico, se planteó como objetivo formular un sustituyente para
mitigar la contaminación de petroquímicos con altas emisiones de gases de
efecto invernadero y daños directos a la biodiversidad. Adicionalmente, la
explosión demográfica ha incrementado la demanda de productos
alimenticios procesados, incrementando a su vez la producción de material
polimérico para su envase y distribución.
Inicialmente se hizo un análisis de biopolímeros de diferentes procedencias
que tuvieran como factor común, un índice considerable de degradación,
determinando que los de tipo polisacárido cumplen con los requerimientos
iniciales para considerarse una materia prima base viable en términos de
adquisición y almacenamiento. Como resultado el almidón de yuca de origen
nativo cumplió con las características necesarias, sin embargo, al
compararse con los polímeros convencionales y de mayor demanda en la
elaboración de empaques como el PP y el PS, presenta una desventaja con
respecto a las propiedades fisicoquímicas. Es por ello, que después de
analizar las propiedades de dichos polímeros convencionales se concluyó
que el almidón de yuca por sí solo como material no era bastante fuerte,
resistente e impermeable; teniendo en cuenta este hallazgo, se planteó la
modificación química de este con Quitosano, incluyendo al proceso una serie
de plastificantes como el glicerol, agua destilada y extracto de propóleo en
etanol en diferentes concentraciones que funcionan como reactivos para la
mejora de propiedades importantes como mecánicas, físicas, de barrera y
propiedades antimicrobianas.
Luego de esto, con el fin de hacer un filme o película con mejores
propiedades de barrera ya que hasta ahora no eran tan aceptables, se
investigaron diferentes fuentes de residuos aprovechables que sirvieran
como aditivo para aportar a la obtención de un biopolímero que funcionara
como material para crear empaques en el sector alimenticio, usando la
cáscara de uva y sus semillas que según nuestras investigaciones
exploratorias cuentan con buenas características de barrera, que al ser
adicionadas a nuestro proceso de modificación química del almidón de yuca
y los demás plastificantes ya nombrados, otorgaba un aumento en la
permeabilidad al agua y el coeficiente de permeabilidad al vapor, así mismo
como su resistencia a la tracción y resistencia al impacto.
Finalmente hubo una investigación de la maquinaria requerida y el proceso
de obtención, en el que paralelamente se estudió la viabilidad en costos la
producción de un lote de 1 kg de la película biodegradable. Posteriormente
se contrastó con la producción de empaques plásticos de origen
petroquímico concluyendo que el proceso de obtención de un bioplástico es
un poco más costoso que el de los polímeros normales, pero que
produciendo a mayor escala podría llegar a ser competitivo por valor unitario
y que ambientalmente haría un impacto muy positivo para la industria
alimenticia, la cual en la actualidad depende de los materiales poliméricos
para su envase y empaque. | spa |
dc.description.abstract | Considering the great ecological problem produced by the massive
consumption of plastic, the objective was to formulate a substitute to mitigate
petrochemical pollution with high greenhouse gas emissions and direct
damage to biodiversity. Additionally, the demographic explosion has
increased the demand for processed food products, in turn increasing the
production of polymeric material for packaging and distribution.
Initially, an analysis was made of biopolymers from different sources that had
as a common factor, a considerable degradation index, determining that the
polysaccharide type met the initial requirements to be considered a viable
base raw material in terms of acquisition and storage. As a result, the native
cassava starch fulfilled the necessary characteristics, however, when
compared with conventional polymers and those of greater demand in the
manufacture of packaging such as PP and PS, it presents a disadvantage
with respect to physicochemical properties. That is why, after analyzing the
properties of said conventional polymers, it was concluded that cassava
starch by itself as a material was not strong, resistant and waterproof enough;
Taking this finding into account, the chemical modification of this with
Chitosan was proposed, including in the process a series of plasticizers such
as glycerol, distilled water and propolis extract in ethanol in different
concentrations that function as reagents for the improvement of important
properties such as mechanical , physical, barrier and antimicrobial properties.
After this, in order to make a film with better barrier properties since until now
they were not so acceptable, different sources of usable waste were
investigated that would serve as additives to contribute to obtaining a
biopolymer that would function as a material to create packaging in the food sector, using the grape peel and its seeds that according to our exploratory
research have good barrier characteristics, which when added to our process
of chemical modification of the cassava starch and the other plasticizers
already named, gave an increase in water permeability and vapor
permeability coefficient, as well as its tensile strength and impact resistance.
Finally, there was an investigation of the required machinery and the
obtaining process, in which the cost feasibility of producing a 1 kg batch of
biodegradable film was studied in parallel. Subsequently, it was contrasted
with the production of plastic packaging of petrochemical origin, concluding
that the process of obtaining a bioplastic is a little more expensive than that
of normal polymers, but that producing on a larger scale could become
competitive by unit value and that environmentally it would have a very
positive impact for the food industry, which currently relies on polymeric
materials for its packaging. | eng |
dc.description.tableofcontents | CONTENIDO
Agradecimientos. 3
Contenido 4
LISTA DE TABLAS 6
LISTA DE GRÁFICAS 7
LISTA DE FIGURAS 7
LISTA DE SÍMBOLOS Y ABREVIATURAS 8
RESUMEN 1
ABSTRACT 2
INTRODUCCIÓN 4
1. PLANTEAMIENTO DEL PROBLEMA 6
2. JUSTIFICACIÓN DEL PROBLEMA 7
3. OBJETIVOS 8
3.1 Objetivo general 8
3.2 Objetivos específicos 8
4. HIPÓTESIS 9
5. MARCO TEÓRICO 10
5.1 Generalidades de los polímeros. 10
5.2 Migración de materiales plásticos. 11
5.3 Generalidades de los biopolímeros 12
5.3.1 Cambios moleculares de los biopolímeros. 13
5.3.2 Aplicaciones 14
5.4. La yuca y su almidón. 14
5.5. Generalidades de los filmes y revestimientos 17
5.6. Envases en la industria de los helados. 17
5.7. Análisis de biopolímeros que logren sustituir a los polímeros de
origen fósil 18
5.7.1. Propiedades para la elaboración de empaques: 19
6. DISEÑO METODOLÓGICO 20
6.1. Proceso de búsqueda de información 20
6.2. Ecuaciones de búsqueda. 21
6.3 Caracterización de polímeros convencionales y naturales 23
6.4 Ajuste de la formulación del almidón de yuca nativo 23
6.5 Costeo para la producción del biopolímero modificado 24
7. RESULTADOS 26
7.1. Polímeros: 26
7.1.1. Propiedades físicas 26
7.1.2. Propiedades mecánicas 27
7.1.3. Propiedades térmicas 28
7.1.4. Propiedades de barrera 29
7.1.5. Análisis de Polímeros 30
7.2. Biopolímeros: 31
7.2.1. Propiedades físicas 31
7.2.2. Propiedades mecánicas 32
7.2.3. Propiedades térmicas 34
7.2.4. Propiedades de barrera 36
7.2.5. Análisis de Biopolímeros 37
7.3. Almidones termoplásticos 38
7.3.1. Propiedades físicas 39
7.3.2. Propiedades mecánicas 40
7.3.3. Propiedades térmicas 41
7.3.4. Propiedades de barrera 42
7.3.5. Análisis de almidones termoplásticos 44
7.4. Modificación del almidón de yuca 44
7.4.4. Confirmación de la modificación del almidón 46
7.5. . Formulación de posibles aditivos y plastificantes 47
7.5.1. Plastificantes 47
7.5.1.1. Glicerina o glicerol 48
7.5.1.2. Agua destilada 50
7.5.2. Aditivos: 50
7.5.3. Modificador químico 51
7.5.3.1.1. Quitina y quitosano 51
7.5.3.1.2. Propiedades del quitosano. 52
7.5.4. Extracto de propóleo en etanol y cera de abejas 52
7.5.5. Uva 53
7.5.5.1.1. Cáscara o piel de uva 54
8. FORMULACIÓN DEL BIOPLÁSTICO: 55
8.1. Proceso productivo de biopolímero de almidón de yuca 56
8.2. Equipo necesario 58
8.3. Determinación de los costos y la viabilidad de la obtención del
bioplástico. 59
CONCLUSIONES 65
BIBLIOGRAFÍA 1
ANEXOS 28 | spa |
dc.format.extent | 103 p. | spa |
dc.format.mimetype | application/pdf | spa |
dc.language.iso | spa | spa |
dc.publisher | Universidad ECCI | spa |
dc.rights | Derechos Reservados - Universidad ECCI 2021 | spa |
dc.title | Formulación teórica para la obtención de filmes y revestimientos a base de almidón de yuca | spa |
dc.type | Trabajo de grado - Pregrado | spa |
dc.publisher.place | Colombia | spa |
dc.relation.references | Abdullah, Z. W., Dong, Y., Han, N., & Liu, S. (2019). Water and gas barrier
properties of polyvinyl alcohol (PVA)/starch (ST)/ glycerol (GL)/halloysite
nanotube (HNT) bionanocomposite films: Experimental characterisation
and modelling approach. Composites Part B: Engineering, 174(February),
107033. https://doi.org/10.1016/j.compositesb.2019.107033 | spa |
dc.relation.references | Acosta, S. (2014). Propiedades de films de almidòn de Yuca y Gelatina.
Incorporacion de aceites Esenciales con efecto antimicrobiano. Tesis
Doctoral. | spa |
dc.relation.references | Afinidad, I. (2020). Afin Idad 591. JOURNAL OF CHEMICAL
ENGINEERING, THEORETICAL AND APPLIED CHEMISTRY EDITED BY
AIQS, 77(591), 164–242.
https://www.raco.cat/index.php/afinidad/article/download/377475/470782/ | spa |
dc.relation.references | Aguilera-Otíz, M., Reza-Vargas, M. del C., Chew-Madinaveita, R. G., &
Meza-Velázquez, J. A. (2011). Propiedades Funcionales De Las
Antocianinas. BIOtecnia, 13(2), 16. https://doi.org/10.18633/bt.v13i2.81 | spa |
dc.relation.references | AINIA. (2015). La correcta especificación de los envases. Centro
Tecnológico Agroalimentario, 36.
https://www.ecoembes.com/sites/default/files/archivos_publicaciones_em
presas/la-correcta-especificacion-de-los-envases.pdf | spa |
dc.relation.references | Al-Jabareen, A., Al-Bustami, H., Harel, H., & Marom, G. (2013). Improving
the oxygen barrier properties of polyethylene terephthalate by graphite
nanoplatelets. Journal of Applied Polymer Science, 128(3), 1534–1539.
https://doi.org/10.1002/app.38302 | spa |
dc.relation.references | Almario, A., & Durango, L. (2018). Estudio de las propiedades absorbentes
de un biopolímero a base de almidón de yuca. Espacios, 39, 15. | spa |
dc.relation.references | Amin, M., Putra, N., Kosasih, E. A., Prawiro, E., Luanto, R. A., & Mahlia, T.
M. I. (2017). Thermal properties of beeswax/graphene phase change
material as energy storage for building applications. Applied Thermal
Engineering, 112, 273–280. | spa |
dc.relation.references | Amjadi, M., & Fatemi, A. (2021). Creep behavior and modeling of highdensity polyethylene (HDPE). Polymer Testing, 94(December 2020),
107031. https://doi.org/10.1016/j.polymertesting.2020.107031 | spa |
dc.relation.references | Arias, B. N. (2016). El consumo responsable: educar para la sostenibilidad
ambiental. Aibi Revista de Investigación, Administración e Ingeniería, 29–
34. https://doi.org/10.15649/2346030x.385 | spa |
dc.relation.references | Aristizábal, J., & Sánchez, T. (2010). Guía técnica para producción y
análisis de almidón de yuca. Fao, 163, 134. https://doi.org/9253056770-
9789253056774 | spa |
dc.relation.references | Arrieta, M. P., Fortunati, E., Dominici, F., & Ray, E. (2014). PLA-PHB /
cellulose based fi lms : Mechanical , barrier and disintegration properties.
107. | spa |
dc.relation.references | Astudillo, J. (2017). ELABORACIÓN DE UN RECUBRIMIENTO
COMESTIBLE A BASE DE ALMIDÓN DE MAÍZ Y DE YUCA PARA
TOMATE CHONTO. Vol37, No., 1–27.
https://ci.nii.ac.jp/naid/40021243259/ | spa |
dc.relation.references | Aulin, C., Karabulut, E., Tran, A., Waìšgberg, L., & Lindström, T. (2013).
Transparent nanocellulosic multilayer thin films on polylactic acid with
tunable gas barrier properties. ACS Applied Materials and Interfaces, 5(15),
7352–7359. https://doi.org/10.1021/am401700n | spa |
dc.relation.references | Auras, R., Harte, B., & Selke, S. (2014). Effect of water on the oxygen
barrier properties of poly(ethylene terephthalate) and polylactide films.
Journal of Applied Polymer Science, 92(3), 1790–1803.
https://doi.org/10.1002/app.20148 | spa |
dc.relation.references | Ayala, J. (2014). DETERMINACIÓN DE LA RESISTENCIA A LA
TRACCIÓN Y TENACIDAD DE UN MATERIAL COMPUESTO A PARTIR
DE BAGAZO DE CAÑA DE AZUCAR Y ALMIDON DE YUCA, A TRAVÉS
DE LOS ENSAYOS DE TENSIÓN Y DE IMPACTO CHARPY. 203. | spa |
dc.relation.references | Ballesteros-Mártinez, L., Pérez-Cervera, C., & Andrade-Pizarro, R. (2020).
Effect of glycerol and sorbitol concentrations on mechanical, optical, and
barrier properties of sweet potato starch film. NFS Journal, 20(April), 1–9.
https://doi.org/10.1016/j.nfs.2020.06.002 | spa |
dc.relation.references | Barrios-Hernández, M. L. (2014). Consideraciones de las propiedades
mecánicas y térmicas para la elaboración de un ducto de riego a partir de
materiales poliméricos postconsumo. Revista Tecnología En Marcha,
27(3), 53. https://doi.org/10.18845/tm.v27i3.2066 | spa |
dc.relation.references | Basiak, E., Lenart, A., & Debeaufort, F. (2017). Effect of starch type on the
physico-chemical properties of edible films. International Journal of
Biological Macromolecules, 98, 348–356.
https://doi.org/10.1016/j.ijbiomac.2017.01.122 | spa |
dc.relation.references | Beeva, D. A., Borisov, V. A., Mikitaev, A. K., Ligidov, M. K., Beev, A. A., &
Barokova, E. B. (2015). Controlling the barrier properties of polyethylene
terephthalate. A review. International Polymer Science and Technology,
42(7), T45–T52. https://doi.org/10.1177/0307174x1504200709 | spa |
dc.relation.references | Belibi, P. C., Daou, T. J., Ndjaka, J. M. B., Michelin, L., Brendlé, J., Nsomd,
B., & Durand, B. (2013). Tensile and water barrier properties of cassava
starch composite films reinforced by synthetic zeolite and beidellite. Journal
of Food Engineering, 115(3), 339–346.
https://doi.org/10.1016/j.jfoodeng.2012.10.027 | spa |
dc.relation.references | Bergel, B. F., da Luz, L. M., & Santana, R. M. C. (2017). Comparative study
of the influence of chitosan as coating of thermoplastic starch foam from
potato, cassava and corn starch. Progress in Organic Coatings, 106, 27–
32. https://doi.org/10.1016/j.porgcoat.2017.02.010 | spa |
dc.relation.references | Bergel, B. F., da Luz, L. M., & Santana, R. M. C. (2018). Effect of poly(lactic
acid) coating on mechanical and physical properties of thermoplastic starch
foams from potato starch. Progress in Organic Coatings, 118(January), 91–
96. https://doi.org/10.1016/j.porgcoat.2018.01.029 | spa |
dc.relation.references | Bergo, P. V. A., Carvalho, R. A., Sobral, P. J. A., Dos Santos, R. M. C., Da
Silva, F. B. R., Prison, J. M., Solorza-Feria, J., & Habitante, A. M. Q. B.
(2006). Physical properties of edible films based on cassava starch as
affected by the plasticizer concentration. Italian Journal of Food Science,
18(5), 167–172. | spa |
dc.relation.references | Bergo, P., Sobral, P. J. A., & Prison, J. M. (2010). Effect of glycerol on
physical properties of cassava starch films. Journal of Food Processing and
Preservation, 34(SUPPL. 2), 401–410. https://doi.org/10.1111/j.1745-
4549.2008.00282.x | spa |
dc.relation.references | Boonsuk, P., Sukolrat, A., Bourkaew, S., Kaewtatip, K., Chantarak, S.,
Kelarakis, A., & Chaibundit, C. (2021). Structure-properties relationships in
alkaline treated rice husk reinforced thermoplastic cassava starch
biocomposites. International Journal of Biological Macromolecules, 167,
130–140. https://doi.org/10.1016/j.ijbiomac.2020.11.157 | spa |
dc.relation.references | Bucio-Villalobos, C. M., & Martínez-Jaime, O. A. (2016). Actividad
antibacteriana de un extracto acuoso de propóleo del municipio de
Irapuato, Guanajuato, México. Agronomía Mesoamericana, 28(1), 223.
https://doi.org/10.15517/am.v28i1.24253 | spa |
dc.relation.references | Caicedo Flaker, C., Ayala Valencia, G., Agudelo Henao, A., & Vargas
Zapata, R. (2011). Efecto Del Glicerol En Las Propiedades Eléctricas,
Comportamiento De Fase Y Permeabilidad Al Vapor De Agua En Películas
Basadas En Almidón De Papa. Revista Colombiana de Física, 42(3), 439. | spa |
dc.relation.references | Carballo Cuevas, B. Z. (2017). Obtención y caracterización de almidones
termoplásticos obtenidos a partir de almidones injertados con poliésteres
biodegradables. 91.
https://cicy.repositorioinstitucional.mx/jspui/bitstream/1003/466/1/PCM_D
_Tesis_2017_Cuevas_Zujey.pdf | spa |
dc.relation.references | Carvacrol, C. O. N., Bicapa, F., & Carvacrol, A. C. O. N. (2016).
Propiedades Funcionales Y Antimicrobianas De Films Bicapa AlmidónPoliésteres. 2015–2016. | spa |
dc.relation.references | Castro, A. (2016). Polímeros biodegradables y química click. Universidad
de Sevilla, 38. https://idus.us.es/xmlui/handle/11441/65106 | spa |
dc.relation.references | Cazón, P., Vázquez, M., & Velazquez, G. (2018). Cellulose-glycerolpolyvinyl alcohol composite films for food packaging: Evaluation of water
adsorption, mechanical properties, light-barrier properties and
transparency. Carbohydrate Polymers, 195, 432–443.
https://doi.org/10.1016/j.carbpol.2018.04.120 | spa |
dc.relation.references | Cazón, P., Velázquez, G., & Vázquez, M. (2019). Characterization of
bacterial cellulose films combined with chitosan and polyvinyl alcohol:
Evaluation of mechanical and barrier properties. Carbohydrate Polymers,
216(February), 72–85. https://doi.org/10.1016/j.carbpol.2019.03.093 | spa |
dc.relation.references | Cazón, P., Velazquez, G., & Vázquez, M. (2019). Novel composite films
from regenerated cellulose-glycerol-polyvinyl alcohol: Mechanical and
barrier properties. Food Hydrocolloids, 89, 481–491.
https://doi.org/10.1016/j.foodhyd.2018.11.012 | spa |
dc.relation.references | Cazón, P., Velazquez, G., & Vázquez, M. (2020). Characterization of
mechanical and barrier properties of bacterial cellulose, glycerol and
polyvinyl alcohol (PVOH) composite films with eco-friendly UV-protective
properties. Food Hydrocolloids, 99(May 2019), 105323.
https://doi.org/10.1016/j.foodhyd.2019.105323 | spa |
dc.relation.references | Chiosso, M. E. (2019). Desarrollo de catalizadores sólidos ácidos para la
eterificación de glicerol obtenido en la producción de biodiésel. | spa |
dc.relation.references | Ciannamea, E. M., Castillo, L. A., Barbosa, S. E., & De Angelis, M. G.
(2018). Barrier properties and mechanical strength of bio-renewable, heatsealable films based on gelatin, glycerol and soybean oil for sustainable
food packaging. Reactive and Functional Polymers, 125, 29–36.
https://doi.org/10.1016/j.reactfunctpolym.2018.02.001 | spa |
dc.relation.references | Cinthya Rivera, T. T. (2014). Obtención de películas biodegradables a
partir de almidón de yuca (Manihot escu/enta Crantz) doblemente
modificado para uso en empaque de alimentos. 147. | spa |
dc.relation.references | Colivet, J., & Carvalho, R. A. (2017). Hydrophilicity and physicochemical
properties of chemically modified cassava starch films. Industrial Crops and
Products, 95, 599–607. https://doi.org/10.1016/j.indcrop.2016.11.018 | spa |
dc.relation.references | Costa, S. S., Miranda, A. L., de Morais, M. G., Costa, J. A. V., & Druzian,
J. I. (2019). Microalgae as source of polyhydroxyalkanoates (PHAs) — A
review. International Journal of Biological Macromolecules, 131, 536–547.
https://doi.org/10.1016/j.ijbiomac.2019.03.099 | spa |
dc.relation.references | Crawford, R. J., & Martin, P. J. (2020). General properties of plastics. In
Plastics Engineering. https://doi.org/10.1016/b978-0-08-100709-9.00001-7 | spa |
dc.relation.references | Delgado, K. L., Varona, G. A., Montilla, C. E., & Villada, H. S. (2016). Efecto
del aditivo tween 80 y de la temperatura de procesamiento en las
propiedades mecánicas de tensión de películas flexibles elaboradas a
partir de almidón de yuca termoplástico. Informacion Tecnologica, 27(6),
145–152. https://doi.org/10.4067/S0718-07642016000600015 | spa |
dc.relation.references | Díaz, A., Sánchez, J., Gallego, A., & Guiberteau, F. (2009). Estudio técnico
sobre la rotura de presión de PVC. XIII Congreso Internacional de
Ingeniería de Proyectos, 1(1), 511–517. | spa |
dc.relation.references | Ding, L., Xie, Z., Fu, X., Wang, Z., Huang, Q., & Zhang, B. (2021). Structural
and in vitro starch digestion properties of potato parenchyma cells: Effects
of gelatinization degree. Food Hydrocolloids, 113(August), 106464.
https://doi.org/10.1016/j.foodhyd.2020.106464 | spa |
dc.relation.references | Xia, C., Wang, W., Wang, L., Liu, H., & Xiao, J. (2019). Multilayer
zein/gelatin films with tunable water barrier property and prolonged
antioxidant activity. Food Packaging and Shelf Life, 19(November 2018),
76–85. https://doi.org/10.1016/j.fpsl.2018.12.004 | spa |
dc.relation.references | Yang, Z., Peng, H., Wang, W., & Liu, T. (2010). Crystallization behavior of
poly(ε-caprolactone)/layered double hydroxide nanocomposites. Journal of
Applied Polymer Science, 116(5), 2658–2667. https://doi.org/10.1002/app | spa |
dc.relation.references | Zehetmeyer, G., Scheibel, J. M., Soares, R. M. D., Weibel, D. E., Oviedo,
M. A. S., & Oliveira, R. V. B. (2013). Morphological, optical, and barrier
properties of PP/MMT nanocomposites. Polymer Bulletin, 70(8), 2181–
2191. https://doi.org/10.1007/s00289-013-0929-9 | spa |
dc.relation.references | Zhang, B., Huang, C., Zhao, H., Wang, J., Yin, C., Zhang, L., & Zhao, Y.
(2019). Eects of cellulose nanocrystals and cellulose nanofibers on the
structure and properties of polyhydroxybutyrate nanocomposites.
Polymers, 11(12). https://doi.org/10.3390/polym11122063 | spa |
dc.relation.references | Zhao, Y., Huerta, R. R., & Saldaña, M. D. A. (2019). Use of subcritical water
technology to develop cassava starch/chitosan/gallic acid bioactive films
reinforced with cellulose nanofibers from canola straw. Journal of
Supercritical Fluids, 148(February), 55–65.
https://doi.org/10.1016/j.supflu.2019.02.022 | spa |
dc.relation.references | Zhu, J., Zhao, F., Xiong, R., Peng, T., Ma, Y., Hu, J., Xie, L., & Jiang, C.
(2020). Thermal insulation and flame retardancy of attapulgite reinforced
gelatin-based composite aerogel with enhanced strength properties.
Composites Part A: Applied Science and Manufacturing, 138(July),
106040. https://doi.org/10.1016/j.compositesa.2020.106040 | spa |
dc.relation.references | Zhu, Q., Wang, J., Sun, J., & Wang, Q. (2020). Preparation,
characterization, and oxygen barrier properties of regenerated
cellulose/polyvinyl alcohol blend films. BioResources, 15(2), 2735–2746. | spa |
dc.rights.accessrights | info:eu-repo/semantics/openAccess | spa |
dc.subject.proposal | Biopolímeros | spa |
dc.subject.proposal | Almidones | spa |
dc.subject.proposal | Plásticos | spa |
dc.subject.proposal | Película biodegradable | spa |
dc.subject.proposal | Polisacárido | spa |
dc.subject.proposal | Petroquímicos | spa |
dc.subject.proposal | Biopolymers | eng |
dc.subject.proposal | Starches plastics | eng |
dc.subject.proposal | Biodegradable film | eng |
dc.subject.proposal | Polysaccharide | eng |
dc.subject.proposal | Petrochemicals | eng |
dc.type.coar | http://purl.org/coar/resource_type/c_7a1f | spa |
dc.type.content | Text | spa |
dc.type.driver | info:eu-repo/semantics/bachelorThesis | spa |
dc.type.redcol | https://purl.org/redcol/resource_type/TP | spa |
dc.type.version | info:eu-repo/semantics/updatedVersion | spa |
dc.description.degreelevel | Pregrado | spa |
dc.description.degreename | Ingeniero en Industrial | spa |
dc.description.program | Ingeniería Industrial | spa |
dc.publisher.faculty | Facultad de Ingenierías | spa |
dc.type.coarversion | http://purl.org/coar/version/c_970fb48d4fbd8a85 | spa |
dc.rights.coar | http://purl.org/coar/access_right/c_abf2 | spa |